1.Supporting 10G full duplex autosensing
2.Supporting auto-MDI/MDIX
3.Supporting 10Gbase-T to 10Gbase-SR/LR/ER/ZR
4.3R function, stable data transmission
5.Short delay time when transparent transmission
6.Supporting Jumbo frame
7.Supporting transmission length of RJ45 network cable
8.Supporting DMI(Diagnostic Monitoring Interface) function of optical transceivers
9.Supporting 850nm, 1310nm, 1550nm and DWDM/CWDM wavelength ruled by ITUT
10.Supporting Loopback, precisely locating the failure, convenient for link test
11.Economical management function within bandwidth
12.With powerful network management function(Web,SNMP,Console), supporting WEB and SNMP
13.Supporting hot plug
14.Easy installation with complete LED indicators for working situation
15.Supporting 2U chassis (16 slots) and standalone use
Description
10G Media Converter SFP+ is a copper to fiber 10G Ethernet media converter based on IEEE 802.3an and IEEE 802.3ae. With SNMP and Webbased management in the 2U 16 Slot Managed Media Converter Chassis, the administrator can monitor, configure and control the activity of each card in the chassis. This converter uses Cat.6a/Cat 7 twisted pair cable as copper transmission media with RJ-45 and 10G optical solution with SFP+ modules. The data stream can be converted bi-directionally from 10G Base-T to 10G Base-R and vice versa. With full duplex wire speed forwarding capability between these two media, it brings you the best and simplest solution for the 10G Ethernet conversion between copper wire and fiber.
More Details of 10G Media Converter SFP+
10G Media Converter SFP+ enhance an organization's current enterprise network by facilitating fiber-optic links from 10GBase-T switches or by extending a 10 Gig Ethernet fiber optic link. By leveraging10G Media Converter SFP+, Ethernet-trained network technicians need minimal training to support 10 Gigabit Ethernet networks. The use of a single protocol throughout the network makes connecting from access to backbone to metropolitan network seamless, resulting in low-latency switching without the need for the packet fragmentation, reassembling, or address translation when reformatting a data stream to another network protocol.
TELEFLY' 10G Media Converter SFP+ allow the backbone of the network to be flexible and easier to manage and maintain. Our converters are available in two form factors, chassis-based slide-in cards and stand-alone converters, allowing you the most flexibility for your network. Our converters also utilize both fixed optics and Small Form-Factor Pluggable (SFP) transceivers allowing you to customize each converter for the cable type you are using. View the two different form
Management access can be achieved locally or remote standalone via network by Web, SNMP, Telnet or Console. FR6000 series together with the MUX and DEMUX can offer a space-efficient and cost-effective solution for xWDM transmission. Complete system information can be set up and displayed, including the name of chassis, terrain and related information of IP, constant operating time and the versions of the hardware and software.
SNMP Management
Specifications
| Physical Port |
| Copper Port |
10GBASE-T RJ45(85m,Cat7) |
| SFP Port |
10GBASE-X R SFP+ interface |
| Parameters |
| Ethernet Standards |
IEEE 802.3an 10GBASE-T IEEE 802.3ae 10Gbps Ethernet |
| Packet Length |
16Kbytes |
| Transmission Mode |
Store and Forward |
| Exchange Property |
Delay time: < 7ps |
| Backplane bandwidth: 20Gbps; Packet forwarding rate: 14.88Mpps |
| LED Indicator |
Power, FX-Link, FX Duplex, TX-SPD, TX-Duplex, TX-Link |
| Power Information |
| Power Input |
Card: DC 5V |
| Standalone: AC 220V/DC -48V |
| Power Consumption |
Full-load<12W |
| Physical Property |
| Dimensions |
Card:120mm×90mm×22mm |
| Standalone:160mm×130mm×32mm |
| Installation Mode |
wall-mountable |
| Weight |
Card:100g |
| Standalone:800g |
| Working Environment |
| Operating Temperature |
0°C~50°C |
| Operating Humidity |
10%~90% non-condensing |
| Storage Temperature |
-10°C~70°C |
| Warranty |
| MTBF |
50,000 hours |
| Defects Liability Period |
1 year warranty, lifetime technical support |
| Certification Standard |
| EMC |
FCC Part15 Class A |
| CE-EMC/LVD |
| RoHS |
| EN61000-4-2 (ESD), EN61000-4-3 (RS) |
| EN6100044 (EFT), EN6100045 (Surge) |
| EN61000^1-6 (CS), EN61000-4-8 |
| EN61000-4-11 |
Company Profile
TELEFLY Telecommunications Equipment Co., Ltd. is a leading Chinese manufacturer founded in 2004, certified by SGS. We provide high quality and price competitive fibre optic cable, fibre optic patch cords, fibre optic patch panels, FTTH equipments, fibre optique patch panels, optical splitters, WDM, optical attenuators, fast connectors ,Ethernet switch ,SFP transceiver and so on. Up till now, our products and solutions have been deployed in over 60 countries and regions, TELEFLY is looking forward to strengthening friendly cooperative relationships with all clients, creating benefits together and sharing the joy of success!
Why you choose TELEFLY be one of your partner?
1.Customer get satisfied quality and service with competitive price and punctual delivery.
2.OEM service with 13-year experiences, free samples are available.
3.Prompt answer for any question and inquiry in the shortest time.
4.Factory directly,reduce your cost and save time.
Cerfifications Showing
Our Exhibition
Professional packing and transportation
Audited Supplier 
){kind=link}
){kind=link}