SFP-10g-T 30m copper Compatible H3c RJ45 Connector fiber opitcal transceiver module
10GBASE-T Copper SFP+ Transceiver
SFP+-10GBASE-T
SFP+10G-T Overview
SFP10-T-C10 SFP+ 10GBASE-T is high performance and high speed copper transceiver module over Cat 6a/7 cable with a link of 30m, and it also supports 10/100/1000/2500/5000Base-T application. The benefit is that it uses standard-based technology with the familiar RJ45 connector and provides backward compatibility with legacy networks.
Product Features
• Supports 10GBase-T using 30m Cat 6a/7 Cable
• Supports 5000Base-T using 50m Cat 5e cable or better
• Supports 2500Base-T using 75m Cat 5e cable or better
• Supports 10/100/1000Base-T using 100m Cat 5e cable or better
• Compliant with IEEE 802.3az • Compliant with SFF-8431 and SFF-8432 MSA
• Low Power Consumption (2.5W MAX @ 30m)
• Auto-negotiates with other 10GBase-T PHYs
• I2C 2-Wire Interface for Serial ID and PHY Register Access
• Auto-sense MDI/MDIX
• RoHS Compliant
• Operating temperature range:0ºC to70ºC
Applications:
Gigabit Ethernet
Switch/Router to Switch/Router Link
High speed I/O for file severs
Description:
SFP+-10GBASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA) . They are compatible with the 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3 . SFP+-10GBASE-T uses the SFP's RX_LOS(must be pulled up on host) pin for link indication. If pull up or open SFP's TX_DISABLE pin, PHY IC be reset.
Applications
10 Gigabit Ethernet
Ordering Information
| Part Number |
Description |
| SFP+10G-T |
10/100/1000/2500/5000/10GBase-T SFP+ Copper RJ-45 Connector |
For More Information:
SfpCodingBox (Dongguan) Limited
Web: sztelefly.en.made-in-china.com
|
General Specifications
| Parameter |
Symbol |
Min |
Typ |
Max |
Unit |
Remarks |
| Data Rate |
DR |
|
10 |
|
Gb/s |
1 |
| Bit Error Rate |
BER |
|
|
10−12 |
|
|
| Operating Temperature |
TOP |
0 |
|
70 |
ºC |
2 |
| Storage Temperature |
TSTO |
−40 |
|
85 |
ºC |
3 |
| Supply Current |
IS |
|
700 |
750 |
mA |
4 |
| Input Voltage |
VCC |
3.14 |
3.3 |
3.46 |
V |
|
| Maximum Voltage |
VMAX |
|
|
4 |
V |
4 |
| Surge Current |
Isurge |
|
|
30 |
mA |
6 |
Notes:
1. IEEE 802.3ae
2. Case temperature
3. Ambient temperature
4. For electrical power interface
5. Referenced to GND
6.Hot Plug above steady state current
Dimensions
ALL DIMENSIONS ARE ±0.2mm UNLESS OTHERWISE SPECIFIED
UNIT: mm
Electrical Pad Layout
Pin Assignment
| PIN # |
Symbol |
Description |
Remarks |
| 1 |
VEET |
Transmitter ground (common with receiver ground) |
1 |
| 2 |
TFAULT |
Transmitter Fault. Not supported |
|
| 3 |
TDIS |
Transmitter Disable. PHY disabled on high or open |
2 |
| 4 |
SDA |
2-wire Serial Interface Data Line |
3 |
| 5 |
SCL |
2-wire Serial Interface Clock Line |
3 |
| 6 |
MOD ABS |
Module Absent. Grounded within the module |
3 |
| 7 |
RS0 |
No Connection Required |
|
| 8 |
LOS |
Loss of Signal indication. Logic 0 indicates normal operation. |
|
| 9 |
RS1 |
No Connection Required |
|
| 10 |
VEER |
Receiver ground (common with transmitter ground) |
1 |
| 11 |
VEER |
Receiver ground (common with transmitter ground) |
1 |
| 12 |
RD- |
Receiver Inverted DATA out. AC coupled |
|
| 13 |
RD+ |
Receiver Non-inverted DATA out. AC coupled |
|
| 14 |
VEER |
Receiver ground (common with receiver ground) |
1 |
| 15 |
VCCR |
Receiver power supply |
|
| 16 |
VCCT |
Transmitter power supply |
|
| 17 |
VEET |
Transmitter ground (common with receiver ground) |
1 |
| 18 |
TD+ |
Transmitter Non-Inverted DATA in. AC coupled |
|
| 19 |
TD- |
Transmitter Inverted DATA in. AC coupled |
|
| 20 |
VEET |
Transmitter ground (common with receiver ground) |
1 |
Notes:
1.Circuit ground is connected to chassis ground
2.Disabled: TDIS>2Vor open, Enabled: TDIS<0.8V
3.Should Be pulled up with 4.7k -10k ohm on host board to a voltage between 2V and 3.6V
Company Profile
TELEFLY Telecommunications Equipment Co., Ltd. is a leading Chinese manufacturer founded in 2004, certified by SGS. We provide high quality and price competitive fibre optic cable, fibre optic patch cords, fibre optic patch panels, FTTH equipments, fibre optique patch panels, optical splitters, WDM, optical attenuators, fast connectors ,Ethernet switch ,SFP transceiver and so on. Up till now, our products and solutions have been deployed in over 60 countries and regions, TELEFLY is looking forward to strengthening friendly cooperative relationships with all clients, creating benefits together and sharing the joy of success!
Why you choose TELEFLY be one of your partner?
1.Customer get satisfied quality and service with competitive price and punctual delivery.
2.OEM service with 13-year experiences, free samples are available.
3.Prompt answer for any question and inquiry in the shortest time.
4.Factory directly,reduce your cost and save time.
Cerfifications Showing
Our Exhibition
Professional packing and transportation
Audited Supplier 
){kind=link}
){kind=link}