Fiber Protection Converter Supporting Remote Management Ethernet Port Support Mdi/Mdix
1.Supporting Remote management
2.The equipment support 2 Fx port with a hot-swappable SFP slot;
3.Support FX port with 1+1 automatic protection switching,switching time will less than 20ms
4.Supports hot plugging
5.Full State Led display
6.Easy installation
7.Fiber Port Supports functions monitoring for SFP modules
8.Ethernet Port Supports Ethernet frame length: 64~9600 bytes packet.
9.Ethernet Port Complies with IEEE802.3
10.Ethernet port Supporting 10/100/1000M, full duplex auto-sensing
11.Ethernet port support MDI/MDIX
12.Supporting 2U chassis (16 slots) and standalone use
Description
Fiber Protection Converter Link status auto-detecting and redundant on Dual ports with the same connector type. Allows only the Primary Port or the Backup Port active at a time.
-When the Primary Port link fail occurs, The traffic swaps th Backup Port automatically
-Once the Primary Port link regains, the traffic swaps from the Backup Port to the Primary Port hardware fiber port redundant.
More Details of Fiber Protection Converter
FR6000 Series is a Centralized Network Management Platform that provides 8 or 16 slots multi-service including Managed Media Converter Card, OEO Converter Card, 1+1 Protection Switching card, CWDM/DWDM MUX/DEMUX Card, etc. All interface cards, fans, management module Card and AC/DC redundant power supply are hot swappable, allowing online field replacement.
Easy Installation
TELEFLY's Fiber Protection Converter allows the backbone of the network to be flexible and easier to manage and maintain. Our converters are available in two form factors, chassis-based slide-in cards and stand-alone converters, allowing you the most flexibility for your network. Our converters also utilize both fixed optics and Small Form-Factor Pluggable (SFP) transceivers allowing you to customize each converter for the cable type you are using.
Management
Management access can be achieved locally or remote standalone via network by Web, SNMP, Telnet or Console. FR6000 series together with the MUX and DEMUX can offer a space-efficient and cost-effective solution for xWDM transmission. Complete system information can be set up and displayed, including the name of chassis, terrain and related information of IP, constant operating time and the versions of the hardware and software.
SNMP Management:
Specifications
| Physical Port |
| Copper Port |
10/100/1000Base-T RJ45 |
| SFP Port |
100/1000BASE-X SFP × 2 |
| Fiber Mode |
1000BASE-X, 550m-120km, SC/ST/FC |
| Parameters |
| Ethernet Standards |
IEEE 802.3 10BASE-T |
| IEEE 802.3u 100BASE-TX/100BASE-FX |
| IEEE 802.3ab Gigabit Ethernet |
| IEEE 802.3z Gigabit Ethernet over Fiber Optic |
| IEEE 802.3x flow control and back pressure |
| IEEE 802.3ah terminal |
| TS-1000 |
| Packet Length |
2046bytes |
| Transmission Mode |
Store and Forward/Cut through |
| Exchange Property |
Delay time: < 7ps Backplane bandwidth: 20Gbps; Packet forwarding rate: 14.88Mpps |
| DIP Switches |
LFP function:Disable/Enable |
| Managed Features |
Supports LFT (Link Fault Pass Through) |
| Supports Digital Diagnostic Monitor Interface (DDM) for SFP |
| Supports OAM/IP in-band management |
| Ingress/Egress Bandwidth control per port |
| Supports 16 IEEE 802.1Q Tag VLAN Group |
| SNMP alarm trap for power loss and port link down |
| Remote loop back test |
| Dying gasp (remote power failure detection) |
| LED Indicator |
Power, FEF, FX-Link, TX-SPD, TX-Duplex, TX-Link, LFP |
| Power Information |
| Power Input |
DC 5V |
| Power Consumption |
Full-load<4W |
| Physical Property |
| Dimensions |
120mm×90mm×22mm |
| Installation Mode |
wall-mountable |
| Weight |
100g |
| Working Environment |
| Operating Temperature |
0°C~50°C |
| Operating Humidity |
10%~90% non-condensing |
| Storage Temperature |
-10°C~70°C |
| Warranty |
| MTBF |
50,000 hours |
| Defects Liability Period |
1 year warranty, lifetime technical support |
| Certification Standard |
| EMC |
FCC Part15 Class A CE-EMC/LVD RoHS EN61000-4-2 (ESD), EN61000-4-3 (RS) EN6100044 (EFT), EN6100045 (Surge) EN61000^1-6 (CS), EN61000-4-8 EN61000-4-11 |
Company Profile
TELEFLY Telecommunications Equipment Co., Ltd. is a leading Chinese manufacturer founded in 2004, certified by SGS. We provide high quality and price competitive fibre optic cable, fibre optic patch cords, fibre optic patch panels, FTTH equipments, fibre optique patch panels, optical splitters, WDM, optical attenuators, fast connectors ,Ethernet switch ,SFP transceiver and so on. Up till now, our products and solutions have been deployed in over 60 countries and regions, TELEFLY is looking forward to strengthening friendly cooperative relationships with all clients, creating benefits together and sharing the joy of success!
Why you choose TELEFLY be one of your partner?
1.Customer get satisfied quality and service with competitive price and punctual delivery.
2.OEM service with 13-year experiences, free samples are available.
3.Prompt answer for any question and inquiry in the shortest time.
4.Factory directly,reduce your cost and save time.
Cerfifications Showing
Our Exhibition
Professional packing and transportation
Audited Supplier 
){kind=link}
){kind=link}