1.Supporting 10/100M, full/half duplex autosensing
2.Supporting 1*9 transceiver and SFP transceiver
3.Supporting IEEE802.3 ,IEEE802.3X
4.Supporting auto-MDI/MDI
5.Max. 2046 bytes packet at store-and-forward mode; Max. 9K bytes packet at cut-through mode
6.Rate Limit function, 32Kbps
7.Supporting Loopback, precisely locating the failure, convenient for link test
8.Supporting LFP, quickly locates the failure
9.Supporting remote power off alarming
10.Economical management function within bandwidth
11.Support SFP DMI(Diagnostic Monitoring Interface) function
12.The status of 10/100M media converters with IP113A/C/F/M chipsets can be monitored and queried at the same chassis system
13.Supporting hot plug
14.Supporting Remote management
15.Easy installation with complete LED indicators for working situation
16.With powerful network management function, supporting WEB and SNMP
17.Supporting 2U chassis (16 slots) and standalone use
Description
Managed Fast Ethernet Media Converter is an IEEE 802.3ah OAM compliant copper to fiber Fast Ethernet solution designed to make conversion between 10/100Base-TX and 100Base-FX with SFP modules and fixed type 1×9 modules. With SNMP and Web-based management in the 2U 16 Slots Managed Media Converter Chassis, the administrator can monitor, configure and control the activity of each 802.3ah series card and remotely connected OAM compliant converter. Converter settings include bandwidth control, duplex, and speed configuration, VLAN tagging, limited Q-in-Q support and SFP DDMI. When used as stand-alone converters, it can be managed by a friendly Web Smart user interface via any web browser.
More Details of Managed Fast Ethernet Media Converter
FR6000 Series is a Centralized Network Management Platform that provides 8 or 16 slots multi-service including Managed Media Converter Card, OEO Converter Card, 1+1 Protection Switching card, CWDM/DWDM MUX/DEMUX Card, etc. All interface cards, fans, management module Card and AC/DC redundant power supply are hot swappable, allowing online field replacement.
TELEFLY's Managed Fast Ethernet Media Converter allow the backbone of the network to be flexible and easier to manage and maintain. Our converters are available in two form factors, chassis-based slide-in cards and stand-alone converters, allowing you the most flexibility for your network. Our converters also utilize both fixed optics and Small Form-Factor Pluggable (SFP) transceivers allowing you to customize each converter for the cable type you are using. View the two different form factors as below:
Management access can be achieved locally or remote standalone via network by Web, SNMP, Telnet or Console. FR6000 series together with the MUX and DEMUX can offer a space-efficient and cost-effective solution for xWDM transmission. Complete system information can be set up and displayed, including the name of chassis, terrain and related information of IP, constant operating time and the versions of the hardware and software.
SNMP Management:
Specifications
| Physical Port |
| Copper Port |
10/100Base-T RJ45 |
| SFP Port |
100BASE-X SFP interfaces |
| Fiber Mode |
100BASE-X, 2km-160km, SC/ST/FC |
| Parameters |
| Ethernet Standards |
IEEE 802.3 10BASE-T |
| IEEE 802.3u 100BASE-TX/100BASE-FX |
| IEEE 802.3x flow control and back pressure |
| TS-1000 |
| Packet Length |
1600bytes |
| Transmission Mode |
Store and Forward/Cut through |
| Exchange Property |
Delay time: < 7ps |
| Backplane bandwidth: 20Gbps; Packet forwarding rate: 14.88Mpps |
| DIP Switches |
LFP function:Disable/Enable |
| Fowrward mode:Store and forward/Cut through |
| Copper Forced mode:10Mbps/100Mbps |
| Managed Features |
Supports LFT (Link Fault Pass Through) |
| Supports Digital Diagnostic Monitor Interface (DDM) for SFP |
| Supports OAM/IP in-band management |
| Ingress/Egress Bandwidth control per port |
| Supports 16 IEEE 802.1Q Tag VLAN Group |
| SNMP alarm trap for power loss and port link down |
| Remote loop back test |
| Dying gasp (remote power failure detection) |
| LED Indicator |
Power, FEF, FX-Link, TX-SPD, TX-Duplex, TX-Link, LFP |
| Power Information |
| Power Input |
DC 5V |
| Power Consumption |
Full-load<4W |
| Physical Property |
| Dimensions |
120mm×90mm×22mm |
| Installation Mode |
wall-mountable |
| Weight |
100g |
| Working Environment |
| Operating Temperature |
0°C~50°C |
| Operating Humidity |
10%~90% non-condensing |
| Storage Temperature |
-10°C~70°C |
| Warranty |
| MTBF |
50,000 hours |
| Defects Liability Period |
1 year warranty, lifetime technical support |
| Certification Standard |
| EMC |
FCC Part15 Class A |
| CE-EMC/LVD |
| RoHS |
| EN61000-4-2 (ESD), EN61000-4-3 (RS) |
| EN6100044 (EFT), EN6100045 (Surge) |
| EN61000^1-6 (CS), EN61000-4-8 |
| EN61000-4-11 |
Audited Supplier 
){kind=link}
){kind=link}